Description
- Snapmaker J1s High Speed Dual Extruder (IDEX) 3D Printer
- Print volume 300 x 200 x 200 mm
- Offers a 5-inch intuitive touchscreen
- Features independent dual extruder (IDEX)
- Built-in nozzle wipers
- Easy-swap hot ends with multi-diameters
- Double-sided PEI Glass Plate
- Breakaway and dissolvable supports
The Snapmaker J1s High Speed Dual Extruder (IDEX) 3D Printer features independent dual extruder (IDEX), ultra-fast print speed, and smoothing optimization. With cast and machined parts, linear rails, intuitive software, and user-centered designs, J1 is also refined and solid.
J1 brings you a top-of-class printing speed of 350 mm/s while ensuring a high resolution of prints. It is made possible by the optimization of the vibration compensation technology. This technology reduces the vibrations caused by high-speed movements, minimizing ringing to enhance print quality. With the maximum acceleration of 10,000 mm/s², you can realize small models packed with details with efficiency.
- 1x Snapmaker J1 3D Printer
- 2x Side Panel
- 1x Left Door
- 1x Right Door
- 1x Orange PLA Filament
- 1x White PLA Filament
- 1x Power Cable
- 1x Tweezers
- 1x USB Flash Drive
- 1x PEI Glass Plate
- 1x Wiping Cloth
- 1x Palette Knife
- 1x Wire Brush
- 1x Diagonal Pliers
- 1x Filament Holder
- 1x USB-B Cable
- 16x M3 x 6 Screw
- 4x M4 x 8 Screw
- 2x Hot End Sock
- 1x 5.5 mm Wrench
- 1x H3.0 Hex Key
- 1x H2.5 Hex Key
- 1x H2.0 Hex Key
- 1x H1.5 Hex Key
- 1x Calibration Card
- 1x Safety Guidelines
- 1x Quick Start Guide
Size
- Machine: 539 x 401 x 464 mm (L x W x H)
- Print Volume 300 x 200 x 200 mm
- Layer Height (with 0.4 mm nozzle): 0.05 mm - 0.3 mm
- Nozzle Diameter: 0.4 mm (included) | 0.2 mm, 0.6 mm, 0.8 mm Hardened (sold separately)
- Filament Diameter: 1.75 mm
- Screen: 5 inch
Build Volume
- Default Mode and Backup Mode: 300 x 200 x 200 mm (L x W x H)
- Copy Mode: 160 x 200 x 200 mm (L x W x H)
- Mirror Mode: 150 x 200 x 200 mm (L x W x H)
Printing
- Technology: Fused Filament Fabrication (FFF)
- Extruder System: Independent Dual Extruders (IDEX)
- Printing Modes: Default Mode, Backup Mode, Copy Mode, and Mirror Mode
- Build Plate: PEI glass plate
- Max. Heated Bed Temperature: 100 °C
- Max. Nozzle Temperature: 300 °C
- Supported Materials: PLA, ABS, HIPS, PC, TPU (Hardness > 90 Shore A), TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF
- Data Transmission Methods: Wi-Fi, USB cable, USB flash drive
- Operating Noise: < 50 dBA
Machine
- Touchscreen: Yes | OS: Android | Resolution: 1280 x 720 pixels
- Memory: 1 GB RAM, 8 GB eMMC
- Repeatability of Linear Rails: ± 0.03 mm (X/Y) | ± 0.02 mm (Z)
- Expected Lifespan of Linear Rails: Over 10 Years
- Weight: 25 kg
Operating Conditions
- Operating Environment: Temperature: 10 - 35 °C | Relative Humidity: 10 - 90 % (non-condensing)
- Storage Environment: Temperature: -20 - 55 °C
- Relative Humidity: 10 - 90 % (non-condensing)
Power
- Input: Rated Voltage: AC 100 V - 240 V, 50 Hz/60 Hz | Rated Current: 4.4 A Max.
- Output: DC 24 V, 400 W Max.
Software
- Supplied Software: Luban (third-party software supported)
- Supported OS of Luban: Windows, macOS
- Supported File Formats: STL, OBJ, 3MF
- Output File Formats: Gcode