- Elderly dog ​​joint care mattressMYACTUATOR RMD-X6-P8-8-C-N, CAN BUS, 1:8, MC-X-300-O Brushless Servo Driver

Title Default Title
Qty:

Description

  • MYACTUATOR RMD-X6-P8-8-C-N, CAN BUS, 1:8, MC-X-300-O
  • Offers a high-performance Brushless Servo Driver
  • Widely used in the drive of various BLDC or PMSM motors
  • Includes various special functions
  • Control modes: Servo mode & Motion mode
  • Communication methods: CAN BUS & RS485 BUS

The MYACTUATOR RMD-X6-P8-8-C-N, CAN BUS, 1:8, MC-X-300-O Brushless Servo Driver is a new generation of high-performance brushless servo driver which can be widely used in the drive of various BLDC/PMSM motors.

V3 Driver Special Function

  • 1. New assistant of myactuator v3.0
  • 2. Support the second encoder at the output shaft
  • 3. Support serial port protection
  • 4. Support motion control mode
  • 5. Support electromagnetic brake
  • 6. Support remote upgrade
  • 7. Support temperature sensor
  • 8. Support serial port isolation
  • 9. Support over-temperature protection
  • 10. Support over-speed protection
  • 11. Support over-voltage protection
  • 12. Support motion control compensation
  • 13. Support bus timeout protection
  • 14. Read bus current
  • 15. Support real-time curve reading
  • 16. Support battery charging and discharging circuit
  • 17. Double over-current protection bus wire + phase wire
  • 18. External interface type: pad + accessories

The driver includes various special functions, such as power-off memory, data recording in case of power-off, bus current sampling: real-time knowledge of the current-torque relationship, and precise control of torque output. At the same time, the new driver has been matched with a friendly visual graphical interface, which is convenient for users to quickly familiarize themselves with the product features.

  • 1x MYACTUATOR RMD-X6-P8-8-C-N, CAN BUS, 1:8, MC-X-300-O Brushless Servo Driver

PDF File

  • Control Mode: Servo mode and Motion mode
  • Communication Method and Baudrate: CAN BUS: 500 Kbps / 1 Mbps | RS485 BUS: 115200 / 500 K / 1 M / 1.5 K / 2.5 K
  • Input voltage: 48 V
  • No-load output Speed: 360 rpm
  • Nominal output Speed: 310 rpm
  • Nominal current: 3.6 A
  • Output Nominal power (Thermal equilibrium point): 135 W
  • Nominal Torque: 4.5 N.M
  • Motor efficiency: 78 %
  • Overload coefficient: 2.5
  • Wire Resistance: 0.55 Ω
  • Wire inductance: 0.18 mH
  • Motor Speed constant: 62 rpm / V
  • Motor Torque constant: 0.17 N.M / A
  • Axial direction payload: 775 N
  • Radial direction payload: 1040 N
  • Rotor inertia: 850 gcm2
  • Reducer ratio: 8:1
  • Backlash: 8 Arc min
  • Motor weight: 490 g